Van điện từ 2 ngã Kaneko (Two-way Solenoid Valve)
Summary
A solenoid valve Ni-po, in one place each valve, inlet and outlet piping is used ON the road, as the valve OFF.
Therefore, most products that use fluid pressure is generally low, less liquid 1.5MPa, 0.99MPa in the gas used in the following because it is used to directly control a liquid such as water, oil, chemicals, and gases such as air and gas is.
However, in our company, depending on the caliber, such as the type of fluid, there is also a production performance of the solenoid valve that can open and close the pressure more than 10MPa.
Series
M20 Series
Fluid: Such as water, oil, air, inert gas
Working pressure
Gas 0.05～0.9MPa
Liquid0.05～1.6MPa
Differential pressure actuated
0.05MPa or more full-time
Fluid temperature
－20℃～60℃
Ambient temperature
－20℃～60℃(That the fluid does not freeze but)
Electrical ratings
Continuity
The allowable voltage fluctuation rate
＋10％，－15％
M22 Series
Fluid
Such as water, oil, air, inert gas
Working pressure
Air and gas 0～0.99MPa
Fluid temperature
－10℃～60℃(That it does not freeze)
Ambient temperature
－10℃～60℃(That it does not freeze)
Electrical ratings
Continuity
The allowable voltage fluctuation rate
＋10％，－15％
M30 Series
Fluid temperature
Be used up to 5 ~ 200 ℃ by the internal structure
Ambient temperature
-20～+40℃(That the fluid does not freeze but)
Fluid viscosity
250cst following
Electrical ratings
Continuity
The allowable voltage fluctuation rate
+10%，-15%
